Hach HQ1110, Basic User Manual

Page: 19 / 158

Option Description
Date-Time Sets the date/time format, date and time in the meter.
Language Sets the meter language.
Access Sets a password to prevent access to the probe settings, some meter
settings (measurement mode, temperature, language) and software
updates. A user without the password cannot delete settings or data when
the access control is on.
Diagnostics Makes a diagnostic file for technical support or service if a technical
problem occurs. The user must connect the meter to a PC to get the file.
Section 10 Probe settings
When a probe is connected to the meter, the user can change the probe settings for measurements,
calibrations and verifications. Refer to the steps that follow to access the settings for the connected
probe. For a complete description of the settings, refer to the online user manual for the meter.
Note: Password protection may prevent access to some menus. Refer to the online user manual for information on
security settings.
1. Push and select Settings. The list of settings shows.
2. Select the probe name.
3. Select the applicable option: Measurement, Calibration or Verification.
Section 11 Data management
The meter saves the data from sample measurements, calibrations and verifications as follows:
• Sample measurements—The meter automatically saves the measured sample data when the
measurement mode is Push to read or Interval. When the measurement mode is Continuous, the
user must select Save to save the measured sample data. The save icon shows on the Home
screen when the measured sample data is in the data log.
• Calibration data—The user must select Save to save the calibration data. The calibration data is
saved in the meter and in the Intellical probe.
• Verification data—The user must select Save to save the verification data.
Complete the steps that follow to view, export or delete data.
1. Push and select Data, or select Data from the Home screen.
2. Select an option.
Option Description
View data Shows the data in the data log. The most recent data shows first. Push the
down arrow to see more data. The calibration icon shows when the data type
is calibration data. The verification icon shows when the data type is
verification data.
To see more details for a data point, select a data row and push the right
arrow. To apply a filter and show only the filtered data, push the left arrow and
select a parameter, data type or date range.
English 19