Hach DRB 200, Instrument Manual

Page: 29 / 32

29
Certification
Hach Company certifies this instrument was tested thoroughly,
inspected and found to meet its published specifications when it
was shipped from the factory.
The DRB 200 has been tested and is certified as indicated to the
following instrumentation standards:
Product Safety:
Certified to EN 61010-1 A1 / A2 & EN 61010-2-010 A/1 per 73/
23/EEC LVD by TUV (Rheinland) with TUV-GS safety mark.
Listed to UL 61010A-1/UL 61010A-2-010 and CSA C22.2 No.
1010.1 A2 and CSA C22.2 No. 1010.2.010A by TUV
(Rheinland) with cTUVus safety mark.
Immunity:
EN 61326 A1/ & A2 (EMC Requirements for equipment for
measurement, control and laboratory use) per 89/336/EEC EMC:
Supporting test records by Hach Company, certified compliance
by Hach Company.
Required Standard/s include:
EN 61000-4-2 (IEC 1000-4-2) Electro-Static Discharge
EN 61000-4-3 (IEC 1000-4-3) Radiated RF Electro-Magnetic
Fields
EN 61000-4-4 (IEC 1000-4-4) Electrical Fast Transients/Burst
EN 61000-4-5 (IEC 1000-4-5) Surge
EN 61000-4-6 (IEC 1000-4-6) Conducted Disturbances Induced
by RF Fields
EN 61000-4-11 (IEC 1000-4-11) Voltage Dips, Interruptions and
Variations
Emissions:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment
for measurement, control and laboratory use-EMC requirements)
Class "B" emission limits. Supporting test records by REICHL
(Report No. 030028) and certified compliance by Hach
Company.