Hach AN-ISE sc, Addendum To The Operator Manual

Page: 6 / 152

6 English
Operation
Calibration (continued)
AN-ISE SC NH
4
–N Enter the displayed ammonium value
AN-ISE SC K Enter the displayed potassium value
Lab value NH
4
–N Enter the laboratory ammonium value
Confirm the entry. Confirm the values entered
Correction result Display the correction results
2-point value correction Perform 2-point value correction
NH
4
–N
1
Select parameter for the 2-point value correction
NO
3
–N
1
Enter the values for the
first point
Enter the values for the 2-point value correction (first point)
Note: The following example shows the input when using a AN-ISE sc probe for
ammonium. When using the AISE sc probe, the input is the same. When using the
NISE sc, it is only possible to input the nitrate and chloride values.
AN-ISE SC NH
4
–N Enter the displayed ammonium value
AN-ISE SC K Enter the displayed potassium value
Lab value NH
4
–N Enter the laboratory ammonium value
Confirm the entry. Confirm the values entered
Enter the values for the
second point.
Enter the values for the 2-point value correction (second point).
Note: The following example shows the input when using a AN-ISE sc probe for
ammonium. When using the AISE sc probe, the input is the same. When using the
NISE sc, it is only possible to input the nitrate and chloride values.
AN-ISE SC NH
4
–N Enter the displayed ammonium value
AN-ISE SC K Enter the displayed potassium value
Lab value NH
4
–N Enter the laboratory ammonium value
Confirm the entry. Confirm the values entered
Correction result Display the correction results
More corrections Other matrix correction options
None No More corrections is activated
2-point matrix correction A 2-point matrix correction can be performed here
NH
4
1
Parameter selection for the 2-point matrix correction.
NO
3
1
Concentration
measurement 1
Saves the currently measured measurement for the first point
Date Displays the date of the current correction of the first point
Concentration 1 Entry and display of reference value for the first point
Concentration
measurement 2
Saves the currently measured measurement for the second point
Date Displays the date of the current correction of the second point
Concentration 2 Entry and display of the reference value for the second point
Previous corrections Selection of one of the last corrections performed
Sensor code The sensor code can be activated or entered here
Activate Activates the sensor code for the individual channels
NH
4
+ K
1
Activate the sensor code for ammonium and potassium
NO
3
+ Cl
1
Activate the sensor code for nitrate and chloride
NH
4
+K + NO
3
+Cl
1
Activate the sensor code for ammonium, potassium, nitrate and chloride
Reset calibration Activates factory calibration
4.2 Sensor setup menu (Continued)