Table of contents
Specifications
on page 3
Operation
on page 17
General information
on page 4
Maintenance
on page 20
Installation
on page 7
Troubleshooting
on page 24
Startup
on page 16
Expanded manual version
For additional information, refer to the expanded version of this manual, which is available on the
manufacturer's website.
Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (W x D x H)
350 x 211 x 178 mm (13.8 x 8.3 x 7.0 in.)
Weight
4.89 kg (10.78 Ibs)
Operating temperature
0 to 50 °C (32 to 122 °F); maximum relative humidity 80% for temperatures
with a maximum of 31 ºC (87.8 °F) decreasing linearly to 50% relative
humidity at 40 ºC (104 °F)
Storage temperature
0 to 50 °C (32 to 122 °F)
Enclosure
NEMA 4X (indoor use)
Fittings
Quick-connect. Connect to ¼-inch O.D tubing
Power requirements
115-240 VAC, 50/60 Hz, 1A
Maximum solution pressure
65 psig, not more than 1 minute duration; 55 psig continuous
Flow rate
100 mL/minute nominal
Particle size
Smallest size: 2 µm
Largest size: 750 µm
Indicators
Power, counting display, cleaning sensor and alarm
Distance from computer to sensor
1219.20 m (4000 ft.) maximum, entire RS485 signal path
Flow control (optional)
Passive control devices available to control water flow through the
instrument
Digital communication
Modbus ASCII; WQS Vista data collection software (optional): Monitor filter
performance and make reports. Refer to the software documentation for
computer requirements.
Hach UDG1000 software (optional) Organize instrument readings on a SCADA system
Analog input/output card (optional)
Input: accepts input signals from external devices
Output: supplies an analog output level proportional to total number of
particles counted (raw count)
Pollution degree
2
Installation category
I
Protection class
III (supplied by SELV power source)
English
3
