HACH LANGE 9184sc User Manual Download Page 3

Page: 3 / 50

Table of Contents

.........................................................................................................................................3

Section 2 General Information

...............................................................................................................................5

2.1 Safety Information ...............................................................................................................................................5

2.1.1 Use of Hazard Information .........................................................................................................................5
2.1.2 Precautionary Labels .................................................................................................................................5

2.2 General Sensor Information ................................................................................................................................6
2.3 Theory of Operation.............................................................................................................................................6

Section 3 Installation

...............................................................................................................................................9

3.1 Mounting the Analyzer.........................................................................................................................................9

3.1.1 Environmental Considerations ...................................................................................................................9
3.1.2 General Installation Considerations .........................................................................................................10

3.5.1 Probe Assembly....................................................................................................................................... 11

3.5.1.1 Placing the Probe Into the Flow Thru Assembly.............................................................................13
3.5.1.2 Using the Optional pH (9184sc TFC only)......................................................................................15

3.6 Connecting the Sensor with the sc Controller ...................................................................................................15

3.6.1 Attaching a sc Sensor with a Quick-connect Fitting .................................................................................15

3.7 Instrument and Controller Startup......................................................................................................................16

Section 4 Operation

...............................................................................................................................................19

4.1 Using the sc Controller ......................................................................................................................................19
4.2 Sensor Data Logging.........................................................................................................................................19
4.3 Sensor Setup.....................................................................................................................................................19

4.3.1 Changing the Sensor Name and Parameter Selection ............................................................................19

4.4 Sensor Diagnostics Menu..................................................................................................................................20
4.5 Sensor Setup Menu...........................................................................................................................................20
4.6 Calibration .........................................................................................................................................................21

4.6.1 Temperature Sensor Calibration ..............................................................................................................21

4.6.1.1 Adjusting the Temperature .............................................................................................................22

4.6.2 pH (9184sc T.F.C. or 9184sc Ch Acid only) .................................................................................22

4.6.2.1 Process pH 1 Point Sample............................................................................................................22
4.6.2.2 Process pH 2 Point Sample............................................................................................................23

4.6.3 Concentration Calibration ........................................................................................................................23

4.6.3.1 Process Calibration ........................................................................................................................24

4.6.4 Zero Calibration .......................................................................................................................................24

4.6.4.1 Chemical Zero Calibration ..............................................................................................................25

4.6.5 Calibration Configuration .........................................................................................................................25

4.7 Set Calibration Defaults ....................................................................................................................................25

Section 5 Maintenance

..........................................................................................................................................27

5.1 Maintenance Schedule ......................................................................................................................................27
5.2 Scheduled Maintenance ....................................................................................................................................27

Summary of Contents for 9184sc


















































Search results

Summary of Contents for 9184sc

Reviews:

HACH LANGE 9184sc, User Manual, Page: 3 / 50

Search results

Summary of Contents for 9184sc

Reviews: