V.
Heated table top
*
1.
Turn on the table top heating by pressing the button ON/OFF on the remote control
(1).
2.
Set the requested temperature by pressing the buttons located below the HEAT '+' or '-' (2) ,
in the range from 1 to 10.
Heated table top warms up to a maximum temperature of 32° C.
3.
Set the auto-off function by pressing the buttons located below the AUTO OFF '+' or '-'(3),
in the range from 1 to 10. The digits represent the number of hours. By default, the heating will turn
off after 1 hour.
If we set 3, for example, the heating will automatically switch off after 3 hours, etc.
IV. Height adjustment
1
2
3
Tables
Description of activities
Xena,
Gallo Plus,
Panda,
Panda Plus,
Alba,
Allora,
Integral,
Mila.
1. Unscrew
a
knob
.
2.
Remove the mobile leg from the
fixing screw, move the mobile leg
to
the chosen position.
3.
Tighten the
knob
.
Bello One,
Therma Top,
Olivia, Feldenkrais.
1. Unscrew
a
knobs
.
2.
Remove the mobile leg from the
fixing screw, move the mobile leg
to
the chosen position.
3.
Tighten the
knobs
.
Panda Al. Plus, Panda Al.,
Medmal, Allano One,
Aero, Aero Plus,
Aero Stabila,
Stół do terapii Cranio -
Sakralnej, Struktural,
Chiro Ultralux 19, Smart,
Feldenkrais AL.
1.
Drive in the locking pin.
2.
Remove the mobile leg to the
chosen position.
3.
Drive out the locking pin.
On/Off
Heat
Auto Off
1
2
3
4
NOTE:
When the heating in the tabletop switches off automatically,
you can reset it by pressing the button ON / OF (1). If the letter
'F' displays on the remote control(4), disconnect the remote
control from the table and the power supply, wait at least 20
seconds and reconnect it.
*
regards table
Therma Top
10
