Habitat Uno 826754, Manual

Page: 2 / 15

Uno
- 10/2021 1
BC
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Cover: 100% Olefin (100% polypropylene).
Padding: polyurethane foam 18 kg/m
3
and loose foam polyethylene.
Structure: aluminium powder coated.
Feet: plastic.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where it will
be installed.
Assemble on a clean, flat surface.
Recommendations for use
This product is designed for outdoor use.
It is recommended to cover or store the product in a clean and dry
place away from the bad weather and winter.
Do not leave stagnant water on the product.
Do not stand on the product.
Maintenance
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
Aluminium
Remove dust regularly with a dry cloth.
Clean with dishwashing liquid and wipe with a clean dry cloth.
To avoid the appearance of marks, do not leave any object immobile
for more than 2 months. Sponge up spills immediately with a cloth.
Then wipe the surface with a clean, dry cloth.
Never allow a layer of moisture to remain on the surface of the
product for long periods of time, especially in bright sunlight.
Avoid contact with abrasive materials that may damage the
surface.
Maintain with circular movements.
Cushions
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry
dabbing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear.
Avoid direct and prolonged exposure of the product to sunlight.
The colors may fade.
Return and tap regularly the cushions so they do not wear out and
do not get dirty unevenly.
To clean the covers and cushions, please follow the maintenance
conditions mentioned on the label sewn inside each cover.
If in doubt, call a professional to carry out cleaning.
Keep the label with lot number, it may be useful in case
of complaint.
If you have any comments or suggestions regarding this
product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at:
www.habitat-design.com or write to this address: HABITAT,
70 AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.