Habasit PQ-01, Use And Maintenance Manual

Page: 4 / 34

Habasit Italiana S.p.A.
Via del Lavoro 50
I-31016
– Cordignano (TV)
Tel.: +39 0438 9113
Fax: +39 0438 912374
Use and maintenance manual
PQ-01
Author: FT Page 4 of 4
Edition: 06/2017 R. 0
Replaces:
0 Introduction
The PQ-
01 welding kit it’s a kit for the welding of thermoplastic round belts.
The splicing operation is performed by butt-end welding of the two ends of the belt.
In the first stage (heating), the belt ends are locked on the two screw clamps of the positioning device and
melted by pressing them on the hot surface of the heating plate.
In the second stage (welding), the heating plate is removed and the melted ends of the belt are pressed
together to weld the junction.
In the third stage (finishing), the junction is allowed to cool and then the burr on the junction is removed by
means of a blade or grinding, obtaining a high quality closed loop round belt.
The PQ-01 kit is suited for on-site installation or for medium/small mass production in a workshop.
The PQ-01 kit includes:

W-01 welder for 120V or 230V power v Heating plate;

CQ-01 joining spring clamp;
According to power supply voltage of the included W-01 welder, the PQ-01 kit is divided into:

PQ-01/6 for 120V power voltage H088000525

PQ-01/8 for 230V power voltage H088000526
Q.ty Description Code
1
W-01/6 Heating plate H088000561
W-01/8 Heating plate H088000562
1 CQ-01 joining spring clamp H080690240
Below are attached the user manuals of the devices making up the kit.