STEP 11
Go to
Setting 7
. Set the
PARAMETER
to
OFF
.
In
PARAMETER 315
enable
FOURTH AXIS
and
FIFTH AXIS
.
Change setting
30 4TH AXIS ENABLE
to
NEW
.
Push
[ENTER]
.
Select the correct rotary model and axis.
Note:
For example, if the nameplate is TR210 Ver. P4, select
TR210-P4-TLT
.
Push
[ENTER]
.
Note:
On some machines, not all rotary models are available on
setting
30 4TH AXIS ENABLE
.
If your rotary model is not available, you must select
USER1
for the A
axis.
Use a parameter list to enter all the A-Axis parameters . If you do not
have a parameter list, speak to your Haas Factory Outlet (HFO).
STEP 12
Change Setting
78 5TH AXIS ENABLE
to
NEW
.
Push
[ENTER]
.
Select the correct rotary model and axis.
Note:
For example, if the nameplate is TR210 Ver. P4, select
TR210-P4-ROT
.
Push
[ENTER]
.
Note:
On some machines, not all rotary models are available on
setting
78 5TH AXIS ENABLE
.
If your rotary model is not available, you must select
USER2
for the B
axis.
Manually enter all the B axis parameters using a parameter list. If you do
not have a parameter list, speak to your Haas Factory Outlet (HFO).
Push
[POWER OFF]
.
Push
[POWER ON]
.
Release
[EMERGENCY STOP]
.
Copyright 2020 by Haas Automation, Inc. No unauthorized reproduction | Last Published On December 13, 2016
8/12
