Haas Automation, Inc. | www.HaasCNC.com | 800-331-6746
Operation Instructions
1. Before operation
•
Ensure you have a proper connection to a 3-phase 220V AC power source
with proper ground wire.
•
Install the correct tool sleeve and an appropriate toolholder.
•
If needed, use one of the provided tool springs to set the length of the tool.
Adjust the cutting tool to the appropriate length, and ensure the toolholder
bore and the cutting tool are clean and free of oil (use a rag/cloth to remove
oil residue).
•
Lower the induction heating head over the clamping portion of the toolholder.
The table below shows the recommended heights:
