11
Procedure:
Set the cursor to the
"ECO mode"
in the main menu.
Press the right
"OK"
push-button.
Change the setting with the use of both middle push-
buttons.
Then press the right
"OK"
push-button.
6.4..5
Desription
– Display brightness - contrast
setting
OK
Heating profile
Contrast
Main menu
Date/time
Language english
Procedure:
Set the Courser on "
Contrast"
and press OK.
By pressing the middle button
+
and
–
you
adjust the Contrast.
Confirm by pressing the OK button.
To exit, press the left button.
6.4..6
Software Version
Info Software
SW-Version: HSP-1-V1.13
Test date: 2015-07-15
Procedure:
Set the Courser on "SW-Version" and press OK.
The current version is displayed.
To exit, press the left button.
6.4..7 Fault screen (top field in the display)
On
Quit.
+++ Distu++
F018
16:18
26°C
23°C
Procedure:
Press "Quit" with the right button
✔
and the error
can be confirmed.
Look point 11 on page 22
6.4..8 Description
– Key lock (child-safe)
+ -
Menu
Aus
08:15
28°C
23°C
Activating the key lock:
Hold the Menu key down for about 10 seconds
until “Key lock activated” appears on the display.
Deactivating the key lock:
Hold the Menu key down for about 10 seconds
until “Key lock activated” is no longer shown on
the display.
7. Operating the pellet stove
The pellet stove may only be heated by adults. Make
sure that children are never left alone with the pellet
stove. (Do not leave the pellet stove unsupervised for a
long period). The pellet stove may only be used in
accordance with these operating instructions.
Please observe the safety instructions set out in Section
2.
7.1.
Fuel
The pellet stove may only be operated with
“pellet” fuel.
With this fuel you have chosen CO
2
-neutral heating for
your home.
Pellets are made from wood waste from sawmills and
planing works and from wood collected from forestry
businesses. These raw materials are therefore of 100%
natural origin and are ground, dried and pressed into
“pellet” fuel without the addition of binding agents.
This fuel is standardised (e.g.
DINplus, ÖNorm M 7135,
ENplus-A1.).
Important:
Your HAAS+SOHN Pelletto pellet stove may
only be operated with standardised wood pellets with a
6
mm diameter
.
You can identify good quality wood pellets by eye by:
smooth, shiny surface, uniform length, little dust. Wood
pellets of lower quality are characterised by: Lengthwise
and crosswise cracks, a high proportion of dust, different
lengths. Precise quality features may however only be
identified with suitable technical analysis equipment.
Summary of Contents for HSP 1.17
Page 28: ...28 14 Circuit diagram ...
