Haas+Sohn HSP 1.17, Installation And Operating Instructions Manual

Page: 10 / 31

10
6.4..1 Setting the date and time
+ - O.K.
14:39:28
Date/time
Fr, 13.09.2013
Procedure:
Set the Courser on "Date/Time" and press OK
✔
By pressing the middle button
+
and
–
you adjust the Date . Confirm Date by pressing the OK
button.
Now you can change the time. Confirm Time by
pressing the OK
✔
button.
To exit, press the left button.
6.4..2 Setting the language
l001
OK
>german <
english
Main menu
Language
Procedure:
Set the Courser on "Language" and press OK.
By pressing the middle button
+
and
–
you adjust the language. Confirm by pressing the OK
button.
To exit, press the left button.
6.4..3 Desription
– Heating profile
h003
+ - OK
( 2 ) 2
Heating profile
Heating profile
Setting range
Setting range from 1 to 4
Factory setting: 2
The value to be set depends on the size of the room that
is to be heated.
Guideline values:

Room size 20m² - Value 1

Room 25m² - Value 2

Room 30m² - Value 3

R
oom bigger than 30m² - Value 4
With older stoves a higher value should be set (over 3)
so as to avoid excess condensation in the fireplace.
Procedure:
In the
main menu, place the cursor on “Heating profile”
Press the right “OK” key.
Adjust the value with the two middle keys
Then press the right “OK” key.
If you would like to quit this menu screen without saving,
press the left “Back” key.
6.4..4 Desription: ECO Mode
OK
No
>Yes
Main menu
ECO-Mode
The Eco mode means the permanent operation with low
output, if the "real room temperature" is higher than the
set "required room temperature".
If the stove is operated in the ECO operating mode, the
heating output will be decreased after exceeding the
"required room temperature", i.e. the stove is not
switched off, but continues to heat with a "small flame".
When the Eco operating mode is set and the "real room
temperature" of 30°C is exceeded, the Eco mode will be
automatically switched off and the pellet stove will
continue to heat without the Eco mode function.
Warning:
The Eco mode can be reactivated at the controlling unit
in the main menu with the use of "Eco mode - YES".