Page 8
The Configuration Page enables you to customize the Haas GPS system for each new customer.
Using the information from the Installation Worksheet, fill in the fields in the sections marked “
Vehicle
Data
,”
Features Installed
,” and “
Alert Notifications will be sent for
”.
The section marked “
Points of Interest
” should be left blank - the customer can enter this information
later.
You will find the section for configuring cell phone services near the bottom of the page. This section
will enable you to specify which cell phones will be allowed to send messages to the Text-N-Track
H1000 monitoring unit, and to receive messages from it. That section of the page will look something
like this:
Input the customer’s information in the section marked “
Alert Notifications from
will be sent to the following email address and phone numbers
”.
You should also input the customer’s information in the section marked “
This vehicle can be
controlled only by the following cell phone numbers by using password specified below.”
Note:
If you intend to use your own cell phone for testing purposes, you can
temporarily
submit your own cell phone information. Your cell phone should be capable of sending and
receiving text messages if you intend to use it for testing. Remember to return to the
Configuration Page to remove your cell phone info when you have completed testing, and
before you deliver the system to your customer.
When you’ve finished inputting the requested information, click on the “Submit” button at the bottom
of the page.
Congratulations! You’ve completed the registration process. You are now ready to install the Text-N-
Track H1000 monitoring unit in the vehicle.
