manualshive.com logo in svg

Haas GPS Text-N-Track H1000, Installation Manual

Share
Download
Haas GPS Text-N-Track H1000 Installation Manual Download Page 3

Page 3 

NOTE TO TECHNICIANS:

DO NOT USE TEST LIGHTS!

ALL OUTPUTS MUST USE RELAYS! 

Some vehicles may require relays for optional featurs.

If you must invert the polarity of a signal, use a relay - do not use a

solid state inverter.

NOTES

Back-Up Battery 

The back-up battery is built into the Text-N-Track H1000 monitoring unit, and recharges while the 

engine is running. If the power is cut, the unit will send an Alert Notification message to the vehicle 

owner, and the backup battery will enable it to continue functioning for up to 2 hours, depending upon 

usage and other factors. 
Basic Installation vs. Advanced Installation 

The Basic Installation is described in pages 1 through page 15. Pages 22-23 provide additional 

information, including wiring color-codes, for Advanced Installations. The Basic Installation provides 

the following features: 

-

  Location Reports 

-

  Speed Alerts  

-

  GeoFence (Theft) Alerts 

-

  Low Battery Alerts 

-

  Maintenance Due 

-

  Reporting via customized Points-of-Interest 

-

  Towing Alerts

Advanced installations include the above, plus any of the following that may be installed: 

-

  Door Lock / Unlock 

-

  Starter Enable / Disable 

-

  Honk Horn / Flash Lights 

-

  Alarm Trigger

-

  Car Start

THIS TRACKER SUPPORTS STARTER

INTERRUPT ONLY!

-

  Ignition On/Off

Summary of Contents for Text-N-Track H1000

















Reviews:

No comments

Brands by name

Popular brands

Load more brands