haacon 1889.5, Operating Manual

Page: 7 / 17

094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466 7
6. Mounting the lifting device
. Take the crank out of its storage positi-
on and fit it on the gear.
2. Fit the top arm. 3. Align the supports individually, place
them on the ground and unfold the
suspension unit.
4. Support ready for mounting. 5. Raise the support until the top arm
projects over the cabin.
6. Crank downwards until the journal
engages in the top corner fitting and
the arm sits on the cabin.
7. Insert the locking bolt on the bottom
support arm in the corner fitting, turn
it through 90° and engage the locking
lever in the mounting.
8. Turn the nut on to the locking bolt by
hand and then tighten it with a 30 mm
ring spanner.
9. Lifting device ready for use (excluding
connection shaft).
0. Container raised 500 mm (excluding
connection shaft).
. Raised 600 mm. Ready for the truck
to be driven under it (excluding con-
nection shaft).
Dismantle following the above procedure in reverse.