H3C WX3500H series Installation Manual Download

Page: 27 / 56

cfa0 Size : 4002MB

CPLD1 Version : 004

CPLD2 Version : 000

PCB Version : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Press

Ctrl

at the prompt within 4 seconds to access the Boot menu.

To access the Boot menu after the system enters the system image file reading and
self-compressing process, restart the device.

Loading the main image files...

Loading file cfa0:/system.bin...............................................

.....................Done.

Loading file cfa0:/boot.bin.................................................

............................................................................

.................................................Done.

Image file cfa0:/boot.bin is self-decompressing.............................

............................Done.

System image is starting...

Cryptographic Algorithms Known-Answer Tests are running ...

CPU 0 of slot 1:

Starting Known-Answer tests in the user space.

Known-answer test for SHA1 passed.

Known-answer test for SHA224 passed.

Known-answer test for SHA256 passed.

Known-answer test for SHA384 passed.

Known-answer test for SHA512 passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for HMAC-SHA224 passed.

Known-answer test for HMAC-SHA256 passed.

Known-answer test for HMAC-SHA384 passed.

Known-answer test for HMAC-SHA512 passed.

Known-answer test for AES passed.

Known-answer test for RSA(signature/verification) passed.

Known-answer test for RSA(encrypt/decrypt) passed.

Known-answer test for DSA(signature/verification) passed.

Known-answer test for random number generator passed.

Known-Answer tests in the user space passed.

Starting Known-Answer tests in the kernel.

Known-answer test for AES passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for SHA1 passed.

Known-answer test for GCM passed.

Known-answer test for GMAC passed.

Known-answer test for random number generator passed.

Summary of Contents for WX3500H series

























































Search results

Summary of Contents for WX3500H series

Reviews:

Related manuals for WX3500H series

Brands by name

Popular brands

H3C WX3500H series, Installation Manual

Search results

Summary of Contents for WX3500H series

Reviews:

Related manuals for WX3500H series

Brands by name

Popular brands