8
Table 2
AC/DC adapter specifications
Item Specification
Input
100 VAC to 240 VAC
Output
+48V
at 0.52 A
You can power the AP by using an AC/DC adapter. Use the AC/DC adapter to connect the power port
of the AP to the local power source.
Check after power-on
Verify that the AP is powered on and operating correctly by examining the AP status LED. For more
information about AP LEDs, see “
.”
Connecting the AP to the network
Connect the Ethernet port of the AP to an Ethernet port of an Ethernet switch for Internet or MAN access.
Figure 6
Connecting the AP to the network
