8
2
Installation preparations
Unpacking and inspection
Before unpacking the AP, ensure that the package is not damaged and that it does not
show signs of water damage. When unpacking the contents, avoid excessive force.
Make sure that you have the following items, which are included with the AP:
One H3C WA2620-AGN Access Point
Wall-mounting hardware:
one combined wall-mounting bracket and table-top stand, four screws, four wall
anchors, suspended ceiling bracket, one ceiling bracket, one slider, two screws
Eight adhesive rubber feet
One console cable
Quick Start Installation Guide (this document)
·One H3C Warranty
· If the package is found to be rusted or water soaked, stop unpacking and contact
your H3C representative immediately.
Connection test
H3C recommends that you connect and check the Ethernet cable and LEDs before you
install the AP in a hard-to-reach location. Also, observe these items before you mount or
connect the AP:
Feature
Description
Switch Port
To connect your wireless network to your
wired network, you need a switch that is
connected to the AP.
