12-26
Parameters
None
Description
Use the
ipv6 nd autoconfig other-flag
command to set the other stateful configuration flag (O) flag to
1 so that the host can acquire information other than IPv6 address through stateful autoconfiguration
(for example, DHCP server).
Use the
undo ipv6 nd autoconfig other-flag
command to restore the default.
By default, the O flag is set to
0
so that the host can acquire other information through stateless
autoconfiguration.
Examples
# Configure the host to acquire information other than IPv6 address through stateless
autoconfiguration.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo ipv6 nd autoconfig other-flag
ipv6 nd dad attempts
Syntax
ipv6 nd dad attempts value
undo ipv6 nd dad attempts
View
Interface view
Default Level
2: System level
Parameters
value
: Number of attempts to send an NS message for DAD, in the range of 0 to 600. The default value
is “1”. When it is set to 0, the DAD is disabled.
Description
Use the
ipv6 nd dad attempts
command to configure the number of attempts to send an NS message
for DAD.
Use the
undo ipv6 nd dad attempts
command to restore the default.
By default, the number of attempts to send an NS message for DAD is 1.
Related commands:
display ipv6 interface
.
Examples
# Set the number of attempts to send an NS message for DAD to 20.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd dad attempts 20
