64
Symptom 5
The AP cannot be connected when the basic configurations of the AP are completed.
Analysis
Check that:
The radio on the AP is not enabled.
The channel and country code settings are incorrect.
The service template is not enabled.
Solution
Enable the radio.
Use the country code of your own country or region.
Enable the service template.
Symptom 6
The AP signal is weak when a client is associated with the AP.
Analysis
Check that:
The value of the max-power is too small.
No antenna is installed, or the antenna is not connected well.
The 2.4 GHz antenna is installed where the 5 GHz antenna should be installed.
The settings of the internal and external antennae are incorrect.
Solution
Set the max-power to the largest.
Install an antenna, and check whether the antenna is well connected.
Correctly installing the 2.4 GHz and 5 GHz antennae.
Correctly configure the internal and external antennae.
