35
|NO. Size(B) Time Type Name |
|1 7884208 Aug/08/2008 20:00:00 N/A wa2200_fat.bin |
|2 428 Apr/26/2000 12:00:34 N/A private-data.txt |
|3 3923104 Apr/26/2000 12:11:16 M+B wa2200_fit.bin |
==========================================================================
CAUTION:
If you modify the main application file name by using the
rename
command, the system cannot
be started. For more information about the
rename
command, see
SSH2.0
in the
Security
Command Reference
in the
H3C WA Series WLAN Access Points Command References
.
Switching the working mode at the CLI
Set the working mode to fit AP
To set the working mode of the AP working in the fat mode to the fit mode, use the
boot-loader file
file
-
url
{
main
|
backup
} command:
On a WA2200 series:
<Sysname>boot-loader file wa2200_fit.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
1!
CAUTION:
Fat and fit files cannot be stored in the Flash at the same time due to the space limitation of
the Flash of the AP. Therefore, before you switch the working mode of the AP from fat AP to fit
AP, you must delete the fat file in the Flash to release the space of the Flash. When deleting
the fat file, use the
delete /unreserved
plus name of the file to be deleted in user view (you
can view the file name using the
dir
command in user view). Then, use TFTP to download the fit
file, and set the working mode of the AP to the fit AP mode.
When you switch the working mode of the AP at the CLI, the configuration file used for next
startup is set to null. After you reboot the AP, the system starts with the factory default
configuration of the current mode.
Set the working mode to fat AP
To set the working mode of the AP working in the fit AP mode to the fat AP mode,
execute the
wlan
ap-execute
ap-name
conversion-to-fatap
command on the AC or
US:
For example, set the working mode of ap1_003 to the fat AP mode:
<Sysname> system-view
