37
For the WA2200 series, WA2600 enhanced APs, and WA2600 outdoor APs, select
2
to enter the serial interface submenu, and then select
3
from the submenu to
modify the baud rate.
For the WA2600 series indoor APs, select
2
to enter the serial interface submenu,
and then select
5
from the submenu to modify the baud rate.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Avaliable>------------------------- |
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):
Select an appropriate baud rate. For example, select
5
for 115200 bps. The following
information appears:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
Now that the serial interface baud rate of the AP has been changed to 115,200 bps
while that of the terminal is still 9,600 bps, the AP and the terminal cannot communicate
with each other. Change the baud rate to 115,200 bps in HyperTerminal.
1.
Disconnect the terminal connection in HyperTerminal, as shown below:
Figure 2
Disconnect the terminal connection
2.
Choose
File
>
Properties
. In the
Properties
dialog box, click
Configure…
and select
115,200 in the
Bits per second
drop-down list box.
