H3C WA Series, Fundamentals Configuration Manual

Page: 83 / 137

11-8
To do… Use the command… Remarks
Display hotkeys display hotkey
Available in any view. See Table 11-2 for
hotkeys reserved by the system.
By default, the Ctrl+G , Ctrl+L and Ctrl+O hotkeys are configured with command line and the Ctrl+T
and Ctrl+U commands are NULL.
z
Ctrl+G corresponds to the display current-configuration command.
z
Ctrl+L corresponds to the display ip routing-table command.
z
Ctrl+O corresponds to the undo debugging all command.
Table 11-2 Hotkeys reserved by the system
Hotkey Function
Ctrl+A
Moves the cursor to the beginning of the current line.
Ctrl+B Moves the cursor one character to the left.
Ctrl+C Stops performing a command.
Ctrl+D Deletes the character at the current cursor position.
Ctrl+E Moves the cursor to the end of the current line.
Ctrl+F Moves the cursor one character to the right.
Ctrl+H Deletes the character to the left of the cursor.
Ctrl+K
Terminates an outgoing connection.
Ctrl+N Displays the next command in the history command buffer.
Ctrl+P Displays the previous command in the history command buffer.
Ctrl+R Redisplays the current line information.
Ctrl+V Pastes the content in the clipboard.
Ctrl+W Deletes all the characters in a continuous string to the left of the cursor.
Ctrl+X Deletes all the characters to the left of the cursor.
Ctrl+Y Deletes all the characters to the right of the cursor.
Ctrl+Z Exits to user view.
Ctrl+] Terminates an incoming connection or a redirect connection.
Esc+B Moves the cursor to the leading character of the continuous string to the left.
Esc+D
Deletes all the characters of the continuous string at the current cursor position and
to the right of the cursor.
Esc+F Moves the cursor to the front of the next continuous string to the right.
Esc+N Moves the cursor down by one line (available before you press Enter )
Esc+P Moves the cursor up by one line (available before you press Enter )
Esc+< Specifies the cursor as the beginning of the clipboard.