8
Figure 9 All Intel VMD Controllers screen
Configuring RAID arrays
1.
On the RAID configuration screen as shown in
, select
Create RAID Volume
, and
press
Enter
.
The
Create RAID Volume
option is available only when the NVMe VROC module identifies
that a minimum of two non-RAID NVMe drives are present.
Figure 10 Selecting Create RAID Volume
2.
, set the
Name
,
RAID Level
,
Select Disks
, and
Capacity
parameters, select
Create Volume
, press
Enter
, select
Yes
, and then press
Enter
to create
the RAID volume.
describes the configuration parameters for creating a RAID volume.
Summary of Contents for UniServer E3200 G3
