5
After splitting or combining interfaces, you must execute the
save
command and reboot the device
for the configuration to take effect. After the device is rebooted, you can view information about the
split or combined interfaces from the
display interface brief
command output.
Configuring switch module services
Prerequisites
•
The switch module has been powered on. For information about powering on the switch module,
see "Powering on the module."
•
You have accessed the switch module. For information about accessing the switch module, see
"Accessing the switch module."
•
You have planned the services to configure for the switch module.
Procedure
For the configuration procedure, see the configuration guide and command reference for H3C
UniServer BX1010E switch module.
Saving the configuration file
Prerequisites
•
The switch module has been powered on. For information about powering on the switch module,
see "Powering on the module."
•
You have accessed the switch module. For information about accessing the switch module, see
"Accessing the switch module.
Procedure
1.
Access user view of the switch module at the CLI. Execute the
dir
command to view the
current file system of the switch module, identify the next-startup configuration file name, and
verify that the flash has sufficient space to accommodate a new startup configuration file.
<Sysname> dir
Directory of flash:
0 drw- - Apr 17 2019 17:43:29 diagfile
1 drw- - Apr 08 2019 14:49:27 flyfishlog
2 -rw- 412 Apr 29 2019 10:50:54 ifindex.dat
3 drw- - Apr 17 2019 17:43:29 logfile
4 drw- - Apr 08 2019 14:51:51 pki
5 drw- - Apr 08 2019 14:49:17 seclog
6 -rw- 2649 Apr 29 2019 10:50:54 startup.cfg
7 -rw- 669171 Apr 29 2019 10:50:55 startup.mdb
8 -rw- 5705728 Apr 28 2019 14:35:55 uis-cmw710-boot-1.00.10.bin
9 -rw- 108381184 Apr 28 2019 14:36:52 uis-cmw710-system-1.00.10.bin
10 -rw- 7168 Apr 29 2019 14:06:09 uis.db
11 -rw- 7168 Apr 29 2019 14:06:09 uis_bak.db
12 drw- - Apr 22 2019 11:19:19 versionInfo
<Sysname>
2.
From any view of the switch module, execute the
save
command to save the current
configuration information.
