36
Configure the username and password for the FTP client to log in to the FTP server before you perform an
FTP operation. For information about configuring the FTP server, see
Fundamentals Configuration Guide
.
To configure the FTP template:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an FTP template
and enter its view.
nqa template ftp
name
N/A
3.
Specify the URL of the
destination FTP server.
url
url
By default, no URL is specified for the
destination FTP server.
Enter the URL in one of the following
formats:
•
ftp://
host
/
filename.
•
ftp://
host
:
port
/
filename.
When you perform the
get
operation, the
file name is required.
When you perform the
put
operation, the
filename
argument does not take effect,
even if it is specified. The file name for
the
put
operation is determined by the
filename
command.
4.
(Optional.) Specify the FTP
operation type.
operation
{
get
|
put
}
By default, the FTP operation type is
get
,
which means obtaining files from the FTP
server.
5.
Specify an FTP login
username.
username
username
By default, no FTP login username is
specified.
6.
Specify an FTP login
password.
password
{
cipher
|
simple
}
password
By default, no FTP login password is
specified.
7.
(Optional.) Specify the
name of a file to be
transferred.
filename
filename
This step is required if you perform the
put
operation.
This configuration does not take effect for
the
get
operation.
By default, no file is specified.
8.
Set the data transmission
mode.
mode
{
active
|
passive
}
The default mode is
active
.
9.
(Optional.) Specify the
source IPv4 or IPv6
address for the probe
packets.
•
IPv4 address:
source ip
ip-address
•
IPv6 address:
source ipv6
ipv6-address
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
probe packets can be sent out.
Configuring optional parameters for the NQA template
Step Command
Remarks
1.
Enter system view.
system-view
N/A