H3C SecPath U200 Series Installation Manual Download Page 5

Page: 5 / 83

About the H3C SecPath

U200-A/U200-M/U200-S

UTM products documentation set

The H3C SecPath U200 series UTM products documentation set includes:

Category Documents

Purposes

Product description and
specifications

Marketing brochures
(U200-A)

Describe product specifications and benefits.

Marketing brochures
(U200-M)

Marketing brochures
(U200-S)

Hardware specifications
and installation

Installation guide

Provides a complete guide to hardware installation
and hardware specifications.

H3C UTM License

Registration and
Activation Guide

Describes how to apply for a license and register the
license.

Software configuration

Configuration guides

Describe software features and configuration
procedures.

Command references

Provide a quick reference to all available
commands.

Configuration examples

Describe typical network scenarios and provide
configuration examples and instructions.

Operations and
maintenance

Release notes (U200-A)

Provide information about the product release,
including the version history, hardware and software

compatibility matrix, version upgrade information,
technical support information, and software

upgrading.

Release notes (U200-M)

Release notes (U200-S)

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web

http://www.h3c.com

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents]

—Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions]

—Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download]

—Provides the documentation released with the

software version.

Summary of Contents for SecPath U200 Series




















































































Search results

Summary of Contents for SecPath U200 Series

Reviews:

Related manuals for SecPath U200 Series

Brands by name

Popular brands

H3C SecPath U200 Series, Installation Manual

Search results

Summary of Contents for SecPath U200 Series

Reviews:

Related manuals for SecPath U200 Series

Brands by name

Popular brands