9
To mount the gateway in a rack:
1.
Determine the cage nut installation holes according to the holes in the mounting brackets, as
shown in
. Mark the cage nut installation holes on the front rack post.
The mounting brackets have been installed in the chassis. You can use other tools, such as a
tape measure, to align the holes in the mounting brackets with the holes on the rack posts and
mark the cage nut installation holes.
Figure 2-5 Marking cage nut installation holes (M9000-AI-E16 gateway)
2.
Install cage nuts in the marked square holes on the front rack posts.
Figure 2-6 Installing the cage nuts
3.
Align the rear of the chassis with the front of the rack.
4.
Use multiple people to lift the gateway by holding the chassis handles.
5.
Place the gateway on the slide rails from the front of the rack. Slide the gateway along the
guide rails until the mounting brackets on the gateway come into contact with the front rack
posts.
6.
Use screws provided with the gateway to secure the gateway to the rack posts.