28
============================================================================
Enter your choice(0-5):
2.
Enter
5
in the Ethernet submenu to configure the network settings.
NOTE:
To use the existing setting for a field, press
Enter
without modifying the setting.
======================<ETHERNET PARAMETER SET>==============================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP):tftp
Load File Name :main.ipe
Target File Name :main.ipe
Server IP Address :192.168.0.2
Local IP Address :192.168.0.1
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
Table 9 Network parameter fields and shortcut keys
Field
Description
'.' = Clear field
Press a dot (.) and then press
Enter
to clear the setting for a
field.
'-' = Go to previous field
Press a hyphen (-) and then press
Enter
to return to the
previous field.
Ctrl+D = Quit
Press
Ctrl
+
D
to exit the ETHERNET PARAMETER SET menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to TFTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file on the device. The target file
name must have the same extension as the source file.
By default, the target file name is the same as the source file
name.
Server IP Address
Set the IP address of the TFTP server.
Local IP Address
Set the IP address of the Ethernet interface that connects to the
TFTP server.
Subnet Mask
Set the IP address mask.
Gateway IP Address
Set a gateway IP address if the device is on a different network
than the server.
After you finish setting the TFTP parameters, the system returns to the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is sda0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
