H3C SECPATH 5080F-CMW710-R9628P2414 Page 21 Release Notes Download

Page: 21 / 65

Category

Features

Socket.

TCP6.

UDP6.

RAWIP6.

Ping6.

DNS6.

Tracert6.

Telnet6.

FIB6.

DHCPv6 client.

DHCPv6 relay.

IPv6 routing and
multicast

RIPng.

OSPFv3.

BGP4+.

Static routes.

PBR.

PIM-SM.

PIM-DM.

IPv6 security

NAT-PT.

Manual tunnel.

IPv6 over IPv4 GRE tunnel (RFC 2784).

6to4 tunnel (RFC 3056).

ISATAP tunnel.

IPv6 packet filtering.

RADIUS.

DS-Lite.

VRRP

VRRP.

IRF

IRF fabric.

Hot backup

Session hot backup.

Configuration synchronization.

CLI

Local configuration through a console port.

Local or remote configuration through Telnet or SSH.

Control of user access to commands.

Debugging.

Network diagnostic tools, including tracert and ping.

Telnetting from the device to other devices.

FTP server/client, and file and application upload and download.

TFTP file transmission.

Logging.

File system management.

User line configuration.

Web interface

Automatic logout of timed out administrators.

Web user login and authentication.

Device management, device monitoring, and firewall policy configuration through

Summary of Contents for SECPATH 5080F-CMW710-R9628P2414


































































Search results

Summary of Contents for SECPATH 5080F-CMW710-R9628P2414

Reviews:

Related manuals for SECPATH 5080F-CMW710-R9628P2414

Brands by name

Popular brands

H3C SECPATH 5080F-CMW710-R9628P2414, Release Notes

Search results

Summary of Contents for SECPATH 5080F-CMW710-R9628P2414

Reviews:

Related manuals for SECPATH 5080F-CMW710-R9628P2414

Brands by name

Popular brands