Installation Manual
H3C S7500E Series Ethernet Switches
Chapter 1 Product Overview
1-52
Note:
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not
yet operational. At system startup, the ALM LED will be ON for a while, but it does not
mean that the card is faulty.
z
ACTIVE LED
The ACTIVE LED shows the active/standby status of the LSQ1SR12GB0. If the
ACTIVE LED is ON, the LSQ1SR12GB0 is active; if OFF, the LSQ1SR12GB0 is
standby.
VI. RESET button
A reset button is provided on the LSQ1SR12GB0 for you to reset the card when
necessary.
1.4 LPUs
1.4.1 LSQ1FP48SA0
I. Introduction
The LSQ1FP48SA0 provides forty-eight 100Base-FX-SFP ports.
Table 1-83
Technical specifications of the LSQ1FP48SA0
Item
Specifications
CPU
MIPS64, 400 MHz
Boot ROM
512 KB
DDR SDRAM
512 MB
Dimensions (H x W x D)
40 × 377 × 355 mm (1.57 × 14.84 × 13.98 in.)
Power consumption
34W to 85 W
Connector type
LC
Number of ports
48
Interface speed
100 Mbps
Pluggable module type
100 Mbps SFP module
Refer to “Appendix A List of Pluggable Modules.”
Standards
z
IEEE 802.3-2005
z
IEEE 802.1D-2004
z
IEEE 802.1Q-2003
z
IEEE802.1X-2004
