Installation Manual
H3C S7500E Series Ethernet Switches
Chapter 6 Software Maintenance
6-4
II. Downloading the host software package
1) Connect the switch to the PC that stores the file to be downloaded through the
management/upgrade Ethernet port (the IP address of the PC is required).
Connect the switch to a PC through the console port (the two PCs can be the
same one).
2) Run the TFTP Server program on the PC connected to the Ethernet port, and
specify the file directory of the program to be downloaded.
3) Run the terminal emulation program on the PC connected to the console port.
Start the switch, enter the boot menu (refer to section 6.2.1 “BOOT Menu” on
page 6-2), and enter
1
when the system displays “Enter your choice(0-5):” to enter
the download protocol menu:
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify bootrom password
0. Reboot
Enter your choice(0-5): 1
4) On the download protocol menu, type
1
to select TFTP, and then press
Enter
to
set the TFTP parameters:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3): 1
Load File name:
Switch IP address:
Server IP address:
5) Input the TFTP parameter values and press
Enter
. The system displays the
following information for confirmation:
Are you sure you want to download file to flash? Yes or No(Y/N)
Enter
Y
to download the file, or
N
to return to the download protocol menu.
6) Type
Y
and press
Enter
. The system starts program downloading and upon its
completion automatically starts to write the program to the Flash. The system
displays the following information upon the completion of the downloading
process:
Attached TCP/IP interface to sbe1.
