2
Figure 2 Console cable connecting the USB port and the USB console port
Table 2 Pinouts for the console cable connecting the USB port and the USB console
port
USB A pin
Signal
mini-USB A/B pin
Signal
1 VBUS
1
VBUS
2 D-
2
D-
3 D+
3
D+
4
ID(NC)
4 GND
5
GND
Connecting the console port to the terminal
IMPORTANT:
•
Identify the mark on the console port and USB console port and make sure you are connecting to
the correct port.
•
The serial ports on PCs do not support hot swapping. To connect a PC to an operating device,
first connect the PC end. To disconnect a PC from an operating device, first disconnect the
device end.
To connect the console cable to the console port:
1.
Connect the DB-9 connector of the console cable to the serial port on a PC or terminal.
2.
Connect the RJ-45 connector of the console cable to the console port on the MPU of the switch.
To connect the console cable to the USB console port:
1.
Connect the USB-A connector of the console cable to the USB port on a PC or terminal.
2.
Connect the mini-USB A/B connector of the console cable to the USB console port on the MPU
of the switch.
Summary of Contents for S7500X Series
Page 119: ...12 Figure 14 Example of a device label...
Page 124: ...4 Figure 6 Power cord management...
