H3C S7500E-XS Series, Command Reference Manual

Page: 25 / 36

18
TCP DSCP value: 10
Flow table:
Table ID(type): 0(MAC-IP)
Table ID(type): 1(Extensibility)
Flow-entry max-limit: 65535
Datapath ID: 0x0000001234567890
Default table-miss: Permit
Forbidden port: VLAN interface
Qinq Network: Disabled
Tcp Nsr: Enabled
Active configuration:
None
Table 7 Command output
Field Description
Configuration information Information about the configuration.
Description Description of the OpenFlow instance.
Active status OpenFlow instance status: Active or Inactive .
Inactive configuration Inactive configuration for the OpenFlow instance.
Active configuration Active configuration for the OpenFlow instance.
Classification VLAN, total
VLANs VLANs that are associated with the OpenFlow instance and the total
number of these VLANs.
loose mode The loose mode is used.
In-band management VLAN,
total VLANs
Inband management VLANs and the total number of them.
Connect mode
Connection mode of the controller:
•
Single —The OpenFlow instance connects to only one controller at a
time.
•
Multiple —The OpenFlow instance can simultaneously connect to
multiple controllers.
MAC address learning Whether MAC address learning is disabled: Enabled or Disabled .
TCP DSCP value DSCP value for OpenFlow packets.
Flow table Flow table information for the OpenFlow instance.
Table ID(type) Type of the flow table: MAC-IP or Extensibility .
count Total number of flow entries included in the current flow table.
Flow-entry max-limit Maximum number of flow entries that the current flow table can include.
Datapath ID Datapath ID of the OpenFlow instance.
Default table-miss Default action of the table-miss flow entry: Permit or Drop .
Forbidden port
Type of interfaces that are forbidden to be reported to the controller:
•
VLAN interface .
•
Virtual Switch Interface . The switch does not support the Virtual
Switch Interface type in the current software version.
•
L3 Physical Interface —Layer 3 Ethernet interfaces.