19
Field Description
Qinq Network
QinQ tagging for double-tagged packets passing an extensibility flow table.
This field is not supported in the current software version.
Tcp Nsr
Whether OpenFlow connection backup is enabled:
•
Enabled
.
•
Disabled
.
Port information
Ports that have been added to the OpenFlow instance.
Active channel information
Information about active channels.
IP address
IP address of the controller configured for the OpenFlow instance.
Port
TCP port number that is used to connect to the controller.
Failopen mode
Connection interruption mode for the OpenFlow instance:
Standalone
or
Secure
.
display openflow meter
Use
display openflow meter
to display meter entry information for an OpenFlow instance.
Syntax
display openflow instance instance-id meter
[
meter-id
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-id
: Specifies an OpenFlow instance by its ID in the range of 1 to 4094.
meter-id
: Specifies a meter by its ID in the range of 1 to 4294901760. If you do not specify a meter ID,
this command displays information about all meter entries for an OpenFlow instance.
Examples
# Display meter entry information for OpenFlow instance 100.
<Sysname> display openflow instance 100 meter
Meter flags: KBPS -- Rate value in kb/s, PKTPS -- Rate value in packet/sec
BURST -- Do burst size, STATS -- Collect statistics
Instance 100 meter table information:
Meter entry count: 2
Meter entry 100 information:
Meter flags: KBPS
Band 1 information
Type: drop, rate: 1024kbps, burst size: 65536kb
Byte count: --, packet count: --
Referencedinformation:
