Installation Manual
H3C S7500E Series Ethernet Switches
Chapter 1 Product Overview
1-47
Table 1-71
Description of the fan status LEDs
LED
Description
OK
z
ON: The fans operate normally.
z
OFF: The fans are faulty or out of position.
FAIL
z
ON: The fans are faulty or out of position.
z
OFF: The fans operate normally.
z
LPU status LEDs (SLOT0 through SLOT11)
SLOT0 through SLOT11: The LEDs indicate the status of the LPUs seated in the twelve
slots.
Table 1-72
Description of the LPU status LEDs
LED
Description
RUN
z
ON/OFF: The LPU is faulty or out of position.
z
Blinking: The LPU is operating normally.
ALM
z
OFF: The LPU is operational or out of position.
z
ON: The LPU is faulty.
Note:
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not
yet operational. At system startup, the ALM LED will be ON for a while, but it does not
mean that the card is faulty.
z
ACTIVE LED
The ACTIVE LED shows the active/standby status of the LSQ1SRPD0. If the ACTIVE
LED is ON, the LSQ1SRPD0 is active; if OFF, the LSQ1SRPD0 is standby.
VI. RESET button
A reset button is provided on the LSQ1SRPD0 for you to reset the card when
necessary.
1.3.9 Salience VI-GE SRPU-LSQ1SRP12GB0
I. Applicable models
z
S7503E
z
S7506E
z
S7510E
z
S7506E-V