Installation Manual
H3C S7500E Series Ethernet Switches
Chapter 1 Product Overview
1-34
IV. On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you
can store host software and logs, and thus upgrade software conveniently. The CF card
is hot swappable.
Table 1-44 describes the CFS LED on the right of the CF card.
Table 1-44
Description of the CFS LED
Status
Description
OFF
No CF card is in position.
ON
The CF card is in position.
z
Console port
Using an RJ-45 connector, the console port can be connected through a regular
asynchronous serial cable directly to a computer for system debugging, configuration,
maintenance, management, and host software loading, or to a modem for remote
system debugging, configuration, maintenance and management.
Table 1-45
Specifications of the console port
Item
Specifications
Connector type
RJ-45
Number of connectors
1
Interface standard
Asynchronous EIA/TIA-232
Baud rate
115,200 bps (defaulting to 9,600 bps)
Transmission distance
15 m (49.21 ft.)
Functions
z
It can be connected to an ASCII terminal.
z
It can be connected to the serial port of a
local or remote (through a pair of modems)
PC running terminal emulation program.
z
10/100BasE-TX management Ethernet port
Using an RJ-45 connector, the 10/100Base-TX management Ethernet port can be
connected to a local PC for switch program loading and switch debugging, or
connected to a remote NMS for remote management.