Installation Manual
H3C S7500E Series Ethernet Switches
Chapter 1 Product Overview
1-21
III. Panel and LEDs
Figure 1-18 shows the front panel of the LSQ1MPUA0.
(1) CF card interface and CFS LED
(2) Console port
(3) 10/100Base-TX Ethernet port for management and LEDs
(4) Power and fan tray status LEDs
(5) LPU status LEDs
(6) ACTIVE LED of LSQ1MPUA0
(7) RESET button
Figure 1-18
Front panel of the LSQ1MPUA0
IV. On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you
can store host software and logs, and thus upgrade software conveniently. The CF card
is hot swappable.
Table 1-16 describes the CFS LED on the right of the CF card.
Table 1-16
Description of the CFS LED
Status
Description
OFF
No CF card is in position.
ON
The CF card is in position.
z
Console port
Using an RJ-45 connector, the console port can be connected through a regular
asynchronous serial cable directly to a computer for system debugging, configuration,
maintenance, management, and host software loading, or to a modem for remote
system debugging, configuration, maintenance and management.
Table 1-17
Specifications of the console port
Item
Specifications
Connector type
RJ-45
Number of connectors
1
Interface standard
Asynchronous EIA/TIA-232
Baud rate
115,200 bps (defaulting to 9,600 bps)