background image

 

10 

 DLDP unidirectional-shutdown mode: Manual 

 DLDP delaydown-timer value: 1s 

 Number of enabled ports: 2 

 

Interface Ten-GigabitEthernet1/0/1 

 DLDP port state: Unidirectional 

 Number of the port’s neighbors: 0 (Maximum number ever detected: 1) 

 

Interface Ten-GigabitEthernet1/0/2 

 DLDP port state: Unidirectional 

 Number of the port’s neighbors: 0 (Maximum number ever detected: 1) 

The output shows that the DLDP port status of both Ten-GigabitEthernet 1/0/1 and Ten-
GigabitEthernet 1/0/2 is Unidirectional. DLDP has detected a unidirectional link on both interfaces 
but does not shut them down.  

# Shut down Ten-GigabitEthernet 1/0/1.  

<DeviceA> system-view 

[DeviceA] interface ten-gigabitethernet 1/0/1 

[DeviceA-Ten-GigabitEthernet1/0/1] shutdown 

The following log information is displayed on Device A: 

[DeviceA-Ten-GigabitEthernet1/0/1]%Jul 12 08:34:23:717 2014 DeviceA 

IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/1 link status is DOWN. 

%Jul 12 08:34:23:718 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/1 is DOWN. 

%Jul 12 08:34:23:778 2014 DeviceA IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/2 link 

status is DOWN. 

%Jul 12 08:34:23:779 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/2 is DOWN. 

The output shows that the physical status and link status of Ten-GigabitEthernet 1/0/1 and Ten-
GigabitEthernet 1/0/2 are down.  

# Shut down Ten-GigabitEthernet 1/0/2.  

[DeviceA-Ten-GigabitEthernet1/0/1] quit 

[DeviceA] interface ten-gigabitethernet 1/0/2 

[DeviceA-Ten-GigabitEthernet1/0/2] shutdown 

# Correct the fiber connections, and bring up Ten-GigabitEthernet 1/0/2.  

[DeviceA-Ten-GigabitEthernet1/0/2] undo shutdown 

The following log information is displayed on Device A: 

[DeviceA-Ten-GigabitEthernet1/0/2]%Jul 12 08:46:17:677 2014 DeviceA 

IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/2 link status is UP. 

%Jul 12 08:46:17:678 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/2 is UP. 

%Jul 12 08:46:17:959 2014 DeviceA DLDP/6/DLDP_NEIGHBOR_CONFIRMED: A neighbor was 

confirmed on interface Ten-GigabitEthernet1/0/2. The neighbor's system MAC is 0023-

8956-3600, and the port index is 2. 

%Jul 12 08:46:17:959 2014 DeviceA DLDP/6/DLDP_LINK_BIDIRECTIONAL: DLDP detected a 

bidirectional link on interface Ten-GigabitEthernet1/0/2. 

The output shows that the physical status and link status of Ten-GigabitEthernet 1/0/2 are up and 
its DLDP neighbor is determined. The links become bidirectional.  

# Bring up Ten-GigabitEthernet 1/0/1.  

Summary of Contents for S6300 Series














Reviews: