background image

 

  Neighbor state: Confirmed 

  Neighbor aged time: 11s 

 

Interface Ten-GigabitEthernet1/0/2 

 DLDP port state: Bidirectional 

 Number of the port’s neighbors: 1 

  Neighbor MAC address: 0023-8956-3600 

  Neighbor port index: 2 

  Neighbor state: Confirmed 

  Neighbor aged time: 12s 

The output shows that the DLDP port status of both Ten-GigabitEthernet 1/0/1 and Ten-
GigabitEthernet 1/0/2 is Bidirectional. 

# Enable the monitoring of logs on the current terminal for Device A, and set the lowest level of the 
logs that can be output to the monitor terminal to 6. 

[DeviceA] quit 

<DeviceA> terminal monitor 

The current terminal is enabled to display logs. 

<DeviceA> terminal logging level 6 

As shown in 

Figure 4

, the two pairs of fibers between Device A and Device B are cross-connected. 

Figure 4 Cross-connected fibers 

 

 

The following log information is displayed on Device A: 

<DeviceA>%Jul 12 08:29:17:786 2014 DeviceA IFNET/3/PHY_UPDOWN: Ten-

GigabitEthernet1/0/1 link status is DOWN. 

%Jul 12 08:29:17:787 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/1 is DOWN. 

%Jul 12 08:29:17:800 2014 DeviceA IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/2 link 

status is DOWN. 

%Jul 12 08:29:17:800 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/2 is DOWN. 

%Jul 12 08:29:25:004 2014 DeviceA IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/1 link 

status is UP. 

%Jul 12 08:29:25:005 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/1 is UP. 

%Jul 12 08:29:25:893 2014 DeviceA IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/2 link 

status is UP. 

%Jul 12 08:29:25:894 2014 DeviceA IFNET/5/LINK_UPDOWN: Line protocol on the interface 

Ten-GigabitEthernet1/0/2 is UP. 

The output shows that the physical status and link status of both Ten-GigabitEthernet 1/0/1 and 
Ten-GigabitEthernet 1/0/2 are down and then up.  

# Display information about interface Ten-GigabitEthernet 1/0/1 on Device A.  

[DeviceA]display interface ten-gigabitethernet 1/0/1 

Ten-GigabitEthernet1/0/1 

Current state: UP 

Summary of Contents for S6300 Series














Reviews: