background image

LED mark 

Status 

Description 

Steady yellow 

The power supply is present, but it is not operating or is faulty. 

Off 

No power supply is present. 

 

Mode LED 

The mode LED (MODE) works in conjunction with the port status LEDs to show more information 
about the switch. 

The mode LED indicates the type of information that the port status LEDs are showing. 

After you press the  mode  button  to change the  mode  LED  status  into  flashing  green or flashing 
yellow,  the mode LED  keeps  in  that state for only 45  seconds and then turns steady green 
automatically. 

Table4-22 Mode LED description 

LED mark 

Status 

Description 

MODE 

Steady green 

The port status LEDs indicate link state of the ports. 

Flashing green 
(available only for 
PoE switches) 

The port status LEDs indicate the PoE status of the ports. 

Flashing yellow 

The port status LEDs indicate the IRF member ID of the switch. For 
example, if the LEDs for ports 1 to 4 are steady green and the others 
are off, the IRF member ID of the switch is 4. 

 

Management Ethernet port LED 

Table4-23 Management Ethernet port LED description 

Management Ethernet port LED status 

Description 

Steady green 

A link is present on the port. 

Flashing yellow 

The port is sending or receiving data. 

Off 

No link is present on the port. 

 

10/100/1000BASE-T autosensing Ethernet port LED 

The 10/100/1000BASE-T autosensing Ethernet port LEDs work in conjunction with the mode LED to 
indicate the operating status of the ports from different aspects, as shown in 

Table4-24

. 

Table4-24 10/100/1000BASE-T autosensing Ethernet port LED description 

Mode LED 
(MODE) status 

Ethernet port LED 
status 

Description 

Steady green (rate 
mode) 

Steady green 

The port is operating at 10/100/1000 Mbps.  

Flashing green 

The port is sending or receiving data at 10/100/1000 
Mbps. 

Off 

No link is present on the port. 

Summary of Contents for S5590-HI Series









































Reviews: