H3C S5590-HI Series, Manual

Page: 34 / 40

Figure4-3 40G QSFP+ cable
(1) Connector (2) Pull tab
NOTE:
•
As a best practice, use H3C transceiver modules and cables for the switch.
•
The H3C transceiver modules and cables are subject to change over time. For the most recent
list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
•
For more information about H3C transceiver modules and cables, see H3C Transceiver Modules
User Guide .
QSFP28 ports
The LSWM2ZQP2P interface module provides two QSFP28 ports.
QSFP28 ports support the following transceiver modules and cables:
•
QSFP28 transceiver modules in Table4-16 .
•
QSFP28 fiber cables in Table4-17 .
•
QSFP28 fiber cables in Table4-18 .
•
QSFP+ transceiver modules in Table4-13 .
•
QSFP+ copper cables in Table4-14 .
•
QSFP+ fiber cables in Table4-15 .
Table4-16 QSFP28 transceiver modules available for the QSFP28 ports
QSFP28
transceiver
module Central
wavelength
(nm)
Connector
Fiber type and
diameter (µm)
Modal
bandwidth
(MHz*km) Maximum
transmission
distance
QSFP-100G-
SR4-MM850
850 MPO
Multimode,
50/125
2000 70 m (229.66 ft)
4700 100 m (328.08 ft)
QSFP-100G-
eSR4-MM850
850 MPO
Multimode,
50/125
4700 300 m (984.25 ft)
QSFP-100G-
PSM4-SM13
10
1310 MPO
Single mode,
9/125
N/A 0.5 km (0.31 miles)
QSFP-100G-
LR4-WDM13
00
Four lanes:
•
1295.56
•
1300.05
•
1304.58
•
1309.14
LC
Single mode,
9/125
N/A 10 km (6.21 miles)
QSFP-100G-
Four lanes: LC
Single mode,
N/A 2 km (1.24 miles)
1
2