H3C S5590-HI Series, Manual

Page: 32 / 40

Table4-12 SFP28 cables available for the SFP28 ports
SFP28 cable Cable length
SFP-25G-D-CAB-1M 1 m (3.28 ft)
SFP-25G-D-CAB-3M 3 m (9.84 ft)
SFP-25G-D-CAB-5M 5 m (16.40 ft)
SFP-25G-D-AOC-3M 3 m (9.84 ft)
SFP-25G-D-CAB-4M-A 4 m (13.12 ft)
SFP-25G-D-AOC-5M 5 m (16.40 ft)
SFP-25G-D-AOC-7M 7 m (22.97 ft)
SFP-25G-D-AOC-10M 10 m (32.81 ft)
SFP-25G-D-AOC-20M 20 m (65.62 ft)
Figure4-2 SFP28 cable
(1) Connector (2) Pull latch
NOTE:
•
As a best practice, use H3C transceiver modules and cables for the switch.
•
The H3C transceiver modules and cables are subject to change over time. For the most recent
list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
•
For more information about H3C transceiver modules and cables, see H3C Transceiver Modules
User Guide .
QSFP+ port
The LSWM2QP2P interface card provides two QSFP+ ports. You can install the QSFP+ transceiver
modules in
Table4-13 , QSFP+ copper cables in Table4-14 , and QSFP+ fiber cables in Table4-15 .
Table4-13 QSFP+ transceiver modules available for the QSFP+ ports
QSFP+
transceiver
module Central
wavelength
(nm)
Connector
Fiber type and
diameter (µm)
Modal
bandwidth
(MHz × km) Max
transmission
distance
1
2