10
NOTE:
The S5500-52C-PWR-EI is shipped with the two expansion interface card slots covered by filler panels.
You can select one or two interface cards for your switch as needed. For the interface cards available for
the S5500-EI Switch Series, see "
." For how to install an interface card, see "
Ports
Console port
Each S5500-EI switch provides one console port on the front panel.
Table 3
Console port specifications
Item Specification
Connector type
RJ-45
Compliant standard
Asynchronous EIA/TIA-232
Transmission baud rate
9600 bps (default) to 115200 bps
Service
•
Provides connection to an ASCII terminal.
•
Provides connection to the serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
10/100/1000Base-T Ethernet port
Table 4
10/100/1000Base-T Ethernet port specifications
Item Specification
Connector type
RJ-45
Interface standard
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X, auto-sensing
Max transmission distance
100 m (328.08 ft)
Transmission medium
Category-5 (or above) twisted pair cable
Standards
IEEE 802.3i, 802.3u, 802.3ab
SFP port
The S5500-EI Switch Series provides 1000Base-X SFP ports, and you can install the 1000 Mbps and 100
Mbps SFP transceiver modules, as shown in
, in the ports.
