18
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables
NOTE:
•
To guarantee the functionality of the SFP/SFP+/XFP ports, always use H3C transceiver modules on the
S5500-EI Switch Series.
•
The transceiver modules available for this switch are subject to change over time. For the most up-to-date
list of transceiver modules, consult your H3C sales representative or technical support engineer.
•
For the transceiver module specifications, see
H3C Low End Series Ethernet Switches Pluggable Modules
Manual. For how to install a transceiver module, see H3C Pluggable SFP/SFP+/XFP Transceiver
Modules Installation Guide.
Table 18
GE SFP transceiver modules
Transceiver module
Central
wavelength Connector Fiber
Max transmission
distance
SFP-GE-SX-MM850-A 850
nm LC
50/125
μ
m multimode
optical fiber
550 m (1804.46 ft)
62.5/125
μ
m
multimode optical fiber 275 m (902.23 ft)
SFP-GE-LX-SM1310-A
1310 nm
LC
9/125
μ
m single mode
optical fiber
10 km (6.21 miles)
SFP-GE-LH40-SM1310
40 km (24.86 miles)
SFP-GE-LH40-SM1550
1550 nm
LC
40 km (24.86 miles)
SFP-GE-LH70-SM1550
70 km (43.50 miles)
SFP-GE-LH100-SM1550
100 km (62.14
miles)
SFP-GE-LX-SM1
310-BIDI
These two
transceiv
er models
should be
used in
pairs.
TX: 1310 nm
RX: 1490 nm
LC
9/125
μ
m single mode
optical fiber
10 km (6.21 miles)
SFP-GE-LX-SM1
490-BIDI
TX: 1490 nm
RX: 1310 nm
SFP-GE-T
N/A
RJ-45
Twisted pair cable
100 m (328.08 ft)
Table 19
FE SFP transceiver modules
Transceiver module
Central
wavelength Connector Fiber
Max transmission
distance
SFP-FE-SX-MM1310-A
1310 nm
LC
62.5/125
μ
m
multimode optical fiber 2 km (1.24 miles)
SFP-FE-LX-SM1310-A
9/125
μ
m single mode
optical fiber
15 km (9.32 miles)
SFP-FE-LH40-SM1310
9/125
μ
m single mode
optical fiber
40 km (24.86 miles)
