H3C S5500-EI series, Quick Start Manual

Page: 9 / 91

Quick Start
H3C S5500-EI Series Ethernet Switches
List of Figures
iv
Figure 3-18
12V RPS power cable........................................3-19
Figure 3-19
12V RPS power connector ................................3-20
Figure 3-20
12V RPS port.....................................................3-20
Figure 3-21
Connect the 12V RPS connector to the chassis........3-21
Figure 3-22
Appearance of the 48V RPS port ......................3-22
Figure 3-23
Connect the 48V RPS connector to the chassis........3-23
Figure 3-24
Appearance of the –48V RPS port ....................3-24
Figure 3-25
Connect the 48V RPS connector to the chassis........3-24
Figure 3-26
Ground the switch through a grounding strip .........3-26
Figure 3-27
Ground the switch by burying the grounding body
into the earth...................................................................3-27
Figure 3-28
Ground through an AC PE wire .........................3-27
Figure 3-29
Ground through the PGND of a power cabinet .........3-28
Figure 3-30
Console cable ....................................................3-29
Figure 3-31
Appearance of a one-port 10 GE XFP interface
module............................................................................3-31
Figure 3-32
Front panel of a one-port 10 GE XFP interface
module............................................................................3-31
Figure 3-33
Appearance of a dual-port 10 GE XFP interface
module............................................................................3-32
Figure 3-34
Front panel of a dual-port 10 GE XFP interface
module............................................................................3-32
Figure 3-35
Install a 10 GE XFP interface module................3-33