Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 NQA Configuration
1-3
Note:
After you enable the NQA client, you can create multiple test groups to perform tests. In
this way, you do not need to enable the NQA client repeatedly.
1.2 Configuring NQA Tests
Note:
z
You need to configure the NQA client and NQA server for TCP, UDP, and jitter tests,
while you need to configure only the NQA client for other tests.
z
You are not recommended to perform TCP, UDP, or jitter test on the ports from 1 to
1023 (known ports). Otherwise, the NQA probes will fail or the corresponding
services of this known port will be unavailable.
This section covers these topics:
z
z
z
z
z
z
Configuring the SNMP Query Test
z
z
z
1.2.1 Configuring the ICMP Test
The ICMP test is mainly used to test whether an NQA client can send packets to a
specified destination and test the roundtrip time of packets.
I. Configuration procedure
Follow these steps to configure the ICMP test:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the NQA client
nqa-agent enable
Required
Create an NQA test group
and enter its view
nqa
admin-name
operation-tag
—
