Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 NQA Configuration
1-8
Failures due to Other Errors: 0
1.2.3 Configuring the FTP Test
The FTP test is mainly used to test the connection with a specified FTP server and the
time necessary for the FTP client to transfer a file to the FTP server.
I. Configuration prerequisites
Before the FTP test, you need to perform some configurations on the FTP server. For
example, you need to configure the username and password used to log onto the FTP
server. For the FTP server configurations, refer to the
File System Management
Configuration
part of the manual.
II. Configuration procedure
Follow these steps to configure the FTP test:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the NQA client
nqa-agent enable
Required
Create an NQA test group
and enter its view
nqa
admin-name
operation-tag
—
Set the test type to FTP
test-type
ftp
Required
Configure a destination
address for a test
destination-ip
ip-address
Required
Here it is the IP address of
the FTP server.
Configure the source IP
address of a test request
packet
source-ip
ip-address
Required
The source IP address
must be that of an
interface on the device
and the interface must be
up. Otherwise, the test will
fail.
Configure the operation
type
ftp-operation
{
get
|
put
}
Optional
get
by default, meaning to
get files from the FTP
server.
Configure a login
username
username
name
Required
Configure a login
password
password
password
Optional
Specify a file to be
transferred between the
FTP server and the FTP
client.
filename
file-name
Required
