Operation Manual – System Maintaining and Debugging
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Basic Configurations
1-11
one time, you can execute the
display diagnostic-information
command in any view
to display statistics of each module’s running status. The execution of the
display
diagnostic-information
command has the same effect as that of the commands
display clock
,
display version
,
display device
, and
display current-configuration
.
Note:
z
For the detailed description of the
display users
command, refer to the
Login
Commands
part of the manual.
z
The
display
commands discussed above are for the global configuration. Refer to
the corresponding section for the
display
command for specific protocol and
interface.
1.2 CLI Features
This section covers the following topics:
z
z
Online Help with Command Lines
z
z
z
Command Line Error Information
z
1.2.1 Introduction to CLI
CLI is an interaction interface between devices and users. Through CLI, you can
configure your devices by entering commands and view the output information and
verify your configurations, thus facilitating your configuration and management of your
devices.
CLI provides the following features for you to configure and manage your devices:
z
Hierarchical command protection where you can only execute the commands at
your own or lower levels. Refer to
Configuring User Levels and Command Levels
for details.
z
Easy access to on-line help by entering “?”
z
Abundant debugging information for fault diagnosis.
z
Saving and executing commands that have be executed.
z
Fuzzy match for convenience of input. You only need to input the characters that
can uniquely identify a keyword to recognize and execute the keyword. For
example, for the keyword
Ethernet
, you only need to input
eth
when you execute
a command with this keyword.
