H3C S12500X-AF Series Hardware Reference Manual Download Page 51

Page: 51 / 65

LED status

Description

Green

A link is present. The port is operating at 1 Gbps.

Off

No link is present.

SFP+ port LEDs

The LPUs provide one LED for each SFP+ port to indicate the link status and data
receiving/transmitting status of the SFP+ ports.

Table 14 SFP+ port LED description

LED status

Description

Flashing

The SFP+ port is receiving or sending data.

Green

A link is present. The SFP+ port is operating at 10 Gbps.

Orange

A link is present. The SFP+ port is operating at 1000 Mbps.

Off

No link is present.

QSFP+ port LEDs

The LPUs provide one LED for each QSFP+ port to indicate the link status and data
receiving/transmitting status of the QSFP+ ports.

Table 15 QSFP+ port LED description

QSFP+ port

LED status

Description

Not split

Flashing

The QSFP+ port is receiving or sending data.

A link is present.

Off

No link is present.

Split into four 10G
channels

Flashing

A minimum of one channel is receiving or sending data.

A link is present on a minimum of one channel.

Off

No link is present.

QSFP28 port LEDs

The LPUs provide one LED for each QSFP28 port to indicate the link status and data
receiving/transmitting status of the QSFP28 ports.

Table 16 QSFP28 port LED description

LED status

Description

Flashing

The QSFP28 port is receiving or sending data.

A link is present.

Off

No link is present.

Summary of Contents for S12500X-AF Series


































































Search results

Summary of Contents for S12500X-AF Series

Reviews:

Related manuals for S12500X-AF Series

Brands by name

Popular brands

H3C S12500X-AF Series, Hardware Reference Manual

Search results

Summary of Contents for S12500X-AF Series

Reviews:

Related manuals for S12500X-AF Series

Brands by name

Popular brands